My DR 19 Officer Helmet

b.loree

Administrator
Staff member
I mentioned this helmet it a recent post where I cleaned up a Baden Officer wappen. I have owned this since the 1980's and have used it as my avatar for decades. Some photos:
IMG_5112.jpeg
I mentioned in my previous post that this has silver plated fittings. If you have ever seen an old silver plate tea service you can recognize the black tarnish on this spike. The underside of the base does have an 08 stamping which initially led me to believe..."German silver" but no it is plate. Officer board purchased from the late Steve McFarland RIP.
IMG_5113.jpeg
This photos clearly shows the effects of decades of polishing, the brass shows through as the plate has been rubbed off. I have cleaned this once... when I first bought it. Never again!
IMG_5114.jpeg
Side view showing the Oldenburg Officer Kokarde, one of the darker shades of blue which was used. OR's kokarden can be the same or much lighter in colour. Again, worn plating on the rosette. Note the curved rosette to match the convex cavalry scales. If you are ever in doubt as to whether your scales are flat or convex, check the rosettes. They always "tell the tale" in my experience...flat for Infantry and curved for Cav.
IMG_5115.jpeg
As my Brit. friends would say "the liner is in good nick"! All of my early collection helmets came from a local CN dealer, well known to Tony myself and all the older collectors. He set up at the major US Shows as well so Steve Mc, Randy T knew him. He passed at least 20 yrs ago.
 
My thanks to all for their positive comments here. As usual, Tony S put me on to...well why not have a board to match the helmet? So again, who do you know that might have a DR 19 board to spare? Naturally you contact Steve McF and he comes through with a very nice example to go along with the helmet. In fact, what we have here on this forum is collectors helping each other which is a good thing, something positive. God knows we are all surrounded with threats and negativity these days. At the very least the "Fing algorithm" that leads you here results in something good. So, keep that in mind friends!
 
Hi Brian,
It's beautiful!
Here's mine—personalized Max Pause—belonging to an Offizierstellvertreter. It's a hybrid helmet similar to an officer's helmet, but without the stars at the base of the peak, and with the gold “troop” star on the front. The tip and fittings are made of nickel-plated nickel silver. The eagle is made of silver-plated nickel silver . Only the chin strap scales are made of brass, and rosettes are made of nickel-plated brass, and the nickel plating has worn off over time. 0DR19 0ffstellvertreter.JPG0DR19 Fähnrich.JPG0DR19 nominatif.JPG0DR19 Offstellvtr.JPG
 
Last edited:
Back
Top