Ulanen-Rgt. Nr. 7

dave mosher

Active member
One of the few issued items in my collection. The helmet is unit marked, squadron marked, initial gartiture acceptance stamp dated 1908 with a second date of 1910, and a garniture stamping of II (Also is painted II inside). There is also a manufacturer's stamp, but is illegible. The plate is the "guard eagle w/o star" vs the grenadier eagle and was authorized just before the war on June 16, 1913, which makes the helmet so unique. The standard Prussian line eagle had been utilized for the regiment, prior to that date. The plate is "crooked" as most are. When you look at the back of the plate, the loops were attached somewhere "close" to the original holes (most likely were sent that way to the depot from the manufacturer). It would appear that the plates were put on the helmet, and if the holes didn't match, or too much of the plate hung down unto the visor (leaving a gap), one of the loops was moved to make the plate flush. That's my story and I'm sticking with it....
 

Attachments

  • IMG_8453.JPG
    IMG_8453.JPG
    1.6 MB · Views: 58
  • IMG_8447.JPG
    IMG_8447.JPG
    2.4 MB · Views: 59
  • IMG_8448.JPG
    IMG_8448.JPG
    2.3 MB · Views: 56
  • IMG_8449.JPG
    IMG_8449.JPG
    1.5 MB · Views: 56
  • IMG_8450.JPG
    IMG_8450.JPG
    1.7 MB · Views: 59
  • IMG_8186.JPG
    IMG_8186.JPG
    3.2 MB · Views: 60
  • IMG_8452.JPG
    IMG_8452.JPG
    1.3 MB · Views: 54
  • IMG_8191.JPG
    IMG_8191.JPG
    1.8 MB · Views: 45
  • IMG_8446.JPG
    IMG_8446.JPG
    2.2 MB · Views: 56
Last edited:
as a respons I would like to add my example of UR7.
it is my only all metal tschapka
the overall condition is good, whereas the liner is in a deplorable condition (no visible markings), and the feldzeichen is repro.
the wappen fits very nice to the shell (no double holes).
 

Attachments

  • UR7 inside.jpg
    UR7 inside.jpg
    167.3 KB · Views: 27
  • UR7 detail1.jpg
    UR7 detail1.jpg
    93.4 KB · Views: 23
  • UR7 detail2.jpg
    UR7 detail2.jpg
    93.8 KB · Views: 23
  • UR7 right.jpeg
    UR7 right.jpeg
    54 KB · Views: 23
  • UR7 left.jpeg
    UR7 left.jpeg
    49.8 KB · Views: 23
  • UR7 liner.jpeg
    UR7 liner.jpeg
    74.7 KB · Views: 28
  • UR7 front.jpeg
    UR7 front.jpeg
    64.7 KB · Views: 30
as a respons I would like to add my example of UR7.
it is my only all metal tschapka
the overall condition is good, whereas the liner is in a deplorable condition (no visible markings), and the feldzeichen is repro.
the wappen fits very nice to the shell (no double holes).
Quite rare
I like it
Steve
 
Here is my UR7 M15 to add to the discussion. It has all the features of the typical M15, but notice the silver wappen and visor. The side lugs are still steel. One detail I like is the two toned chinstrap hardware. Notice the buckles are silver. The wappen is correctly slightly off.

In my research, a lot of them are reissued and this one has multiple markings.

The excerpt from Casque a Pointe says the following:
Left: dismantled top of a tschapka model 1915, for troops of regiment number 7. With its nickel silver fittings, it is a very rare headdress, being a genuine tschapka model 1915. It avoids the order of April 1915 which prescribes that all fittings had to be in gray steel.
 

Attachments

  • Casques a Pointe.jpg
    Casques a Pointe.jpg
    344.9 KB · Views: 9
  • 5.JPG
    5.JPG
    566.8 KB · Views: 8
  • 4.JPG
    4.JPG
    627.9 KB · Views: 8
  • 3.JPG
    3.JPG
    524.6 KB · Views: 9
  • 2.JPG
    2.JPG
    480.8 KB · Views: 10
  • 1.JPG
    1.JPG
    496.9 KB · Views: 11
Back
Top